Calculation: Pressure peak in dosing head at pressure stroke

Pressure peak + operating pressure = max. pressure against which the dosing pump must work
Density Chemical density [kg/dm3] (Water = 1.0)
Q Pump delivery capacity [l/h]
F Pump stroke frequency [strokes/min]
L length of pressure line [m]
d Diameter of pressure line [mm]
decimal places
pBeschl pressure peak [bar]



The calculation can be used for sinus-like conveying (piston pump with 100% stroke length) only.

Any evaluations and results are based on rough calculations and have to be checked by your own. No guarantee.

2319