Centrifugal pump AM
Conveying chemicals safely
With non-contact magnetic power transmission, no dynamic shaft seals are necessary and thus a hermetically sealed pump housing is possible, which prevents leaks. Bearing materials made of ceramic and Rulon allow individual adaptation to difficult operating conditions, such as dry run, small amounts of solids or highly aggressive media.
Centrifugal pump AM
- No dynamic shaft seals
- Pump hermetically sealed
- Version "R" suitable for limited dry running
- Also suitable for liquids with high specific weight
- Variable connections possibilities
Further product views
Type | WR | GF | GX | ||
---|---|---|---|---|---|
Material volute casing rear casing impeller | PP (GF-reinforced) | ECTFE (CF-reinforced) | |||
Material seal | Viton® 1) | Viton® 1) 2) | |||
Guide bearing "R" | HD-carbon | ||||
Guide bearing "X" | SiC | - | |||
Guide bearing "N" | Rulon® | ||||
Material shaft | Ceramic | SiC | |||
Material thrust ring | Ceramic | SiC | |||
Operating temperature | °C | -5...+80 | -20...+100 |
04.04 | 04.08 | 06.08 | 06.10 | |||
Inlet | BSP | G 3/4 f | G 1 m | G 1 1/4 m | ||
Outlet | BSP | G 3/4 m | G 1 m | G 1 1/4 m | ||
Hose connection | mm | 25.5 | - | |||
Inlet and outlet flange | - | 25 | 32 | |||
Max. delivery rate | m3/h | 5 | 7 | 10 | 12 | |
Max. delivery head | mWC | 9 | 11 | 12 | ||
Motor power motor type N | kW | 0.18 | 0.25 | 0.37 | 0.55 | |
Motor power motor type P | kW | 0.25 | 0.37 | 0.55 | 0.75 | |
Motor power motor type S | kW | 0.37 | 0.55 | 0.75 | 1.1 |
On request: 1) EPDM and 2) FFKM (Kalrez®)
Subject to technical changes
BA: Operation instruction
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com