FLOWCON LP 1
Flow control
The FLOWCON LP 1 flow sensor was specially developed for monitoring oscillating volume flows. Thanks to ist particularly compact design it can be installed directly on a pump's discharge valve. It uses a reed switch to forward flow fluctuations in the line as an electric pulse. Software embedded in the MAGDOS LP is used to analyse the FLOWCON signal. As an alternative, the system can analyse the FLOWCON using an SPS.
Flow Meter FLOWCON LP 1
- Efficient monitoring of pulsating volume flows
- Compact design, highly robust product
- Easy handling
- Capacity between 0.36 and 13 l/h
- Electric analysis using MAGDOS LP or performed externally using SPS
Further product views
Housing material | PMMA / PVC | ||
---|---|---|---|
Sealing material | FPM or EPDM | ||
Connections | Input | Cap nut G5/8 | |
Output | Threaded pin G5/8 | ||
Dosing range | MAGDOS LP 05 – 15 | ||
Max. viscosity | 400 mPas (dependent on spring used) If the dosing pump is used MAGDOS LP 15: 40 mPas |
||
Max. back pressure | 16 bar | ||
Max. stroke frequency | 250 min-1 | ||
Electrical connection | M12x1 plug connector (A-coded) | ||
Permitted media temperature | 5 – 35 °C | ||
Permitted ambient temperature | 0 – 40 °C | ||
Switching capacity reed switch | 48 V AC/DC, 0.5 A, max. 12 VA | ||
Weight | 0.26 kg |
Subject to technical changes
BA: Operation instruction
PI: Product information
Description | Order no. | ||
---|---|---|---|
PVC base | Clamp connection 4/6 - G5/8 | 34560 | |
Clamp connection 6/9 - G5/8 | 40934 | ||
Clamp connection 6/12 - G5/8 | 34561 | ||
PVC wall bracket | G5/8 | 34563 |
Spare parts
Description | Order no. | |
---|---|---|
Spare spring for viscosities of up to 150 mPas | 23788 | |
Spare spring for viscosities of up to 400 mPas | 22016 | |
Spare reed switch | 79615 |
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com