Water Sampling Station PM 04
Water Values – Valuable Water
The water sampling station PM 04 collects the data for free chlorine, chlorine dioxide, pH values, redox potential, and temperature depending on the installed features. The water quality is controlled by a TOPAX L controller. All of the elements that are necessary for measuring and controlling are combined at the water sampling station. The sensors for measuring the water values are mounted in a transparent multi-function instrument block.
Water Sampling Station PM 04
- Measurement of free chlorine or chlorine dioxide with potentiostatic measuring cell
- Further parameters - pH value, Redox and temperature (each as per model)
- Hydrostatic flow regulation
- Flow monitor
- Zero calibration is not required
- Compact and transparent construction
Further product views
Free chlorine / chlorine dioxide | potentiostatic chlorine | ||
---|---|---|---|
Free chlorine / chlorine dioxide measuring range | mg/l | 0...10 (Cl2) / 0...2 (ClO2) | |
pH value | pH-single-rod measuring chain | ||
Measuring range pH | 0...14 | ||
Redox | ORP single-rod measuring chain | ||
Measuring range redox | mV | up to +1000 | |
Sample water consumption | l/h | approx. 45 | |
Pressure at inlet | bar | 0.2...6 | |
Pressure at outlet | outflow sample water must be able to run off | ||
Temperature | °C | max. 40 | |
Connection Inlet | mm | hose liner Ø6 Male | |
Connection Outlet | mm | hose liner Ø10 Male | |
Dimensions (W x H x D) | mm | 320 x 730 x ~100 |
Subject to technical changes
BA: Operation instruction
PI: Product information
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com