Water Sampling Station PM 01
Water Values – Valuable Water
The water sampling station PM 01 collects the data for free chlorine, pH values, redox potential, temperature and conductivity. An electronic controller from the TOPAX series controls the water quality by using the incoming measuring signals. The sensors for measuring the water values are mounted in a transparent multi-function instrument block. Free chlorine is measured using a potentiostatic excessive chlorine cell.
Water Sampling Station PM 01
- Measurement of free chlorine, pH value, Redox, temperature and conductivity (optional)
- Hydrostatic flow regulation
- Flow monitor
- Potentiostatic chlorine measurement
- Zero calibration is not required
- Transparent construction
- DIN 19643 conform
- TOPAX controller arbitrary
- Integrated Y-strainers
Further product views
| Free chlorine | potentiostatic chlorine measuring cell | ||
|---|---|---|---|
| Free chlorine measuring range | mg/l | 0...2 | |
| pH value | pH-single-rod measuring chain | ||
| pH value measuring range | 0...14 | ||
| Redox | redox / ORP single-rod measuring chain | ||
| Redox measuring range | mV | 0...1000 | |
| Sample water consumption | l/h | approx. 45 | |
| Pressure at inlet | bar | 0.2...6 | |
| Pressure at outlet | outflow sample water must be able to run off | ||
| Temperature | °C | max. 40 | |
| Connection Inlet | mm | hose liner Ø6 Male | |
| Connection Outlet | mm | hose liner Ø10 Male | |
| Dimensions (W x H x D) | mm | 490 x 900 x ~130 |
Subject to technical changes
BW: Operation instruction
PI: Product information
MB: Dimension sheet
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com