NetCon
The perfect connection
The network adapter NetCon is the central link between the connected actuators and the Ethernet network. The functions of the connected control units and sensors are thus transferred to a Master via the NetCon and the network. The multi-channel controller TOPAX DX Net meets all necessary requirements on a Master and has an Ethernet network interface module through which all controller outputs can be controlled.
NetCon
- Central link between the Ethernet and a actuator
- Different output functions
- Connection of Ethernet compatible devices to data transfer
- Simplified programming, operation and maintenance
- Device configuration without auxiliary equipment
- Clearly arranged display
- Protection class IP65
Further product views
Supply voltage | 230 V AC, 50/60 Hz | ||
---|---|---|---|
Power consumption | W | approx. 24 | |
Dimensions (W x H x D) | mm | 166 x 161 x 72 | |
Display | graphic display with 128 x 64 pixels and backlight | ||
Keyboard | keypad with nine function keys | ||
Analogue input | for potentiometer of the position feedback of the control valve (1...10 kOhms) | ||
Digital inputs | 2x level pre-alarm and main alarm (alternatively flow control) alarm relay |
||
Digital outputs | control 1 control valve control 1-2 dosing pumps control 1-2 peristaltic pumps |
||
Output functions | pulse frequency 10... 200 impulses/min. pulse length 10…120 seconds control output (ON/OFF) OPEN/CLOSE control 3-point steps (ATE drive) |
||
Network connection | RJ 45 | ||
Load capacity of the outputs | 230 V AC, 3 A | ||
Protection class | IP65 | ||
Ambient temperature | °C | -5 ... +45 | |
Atmospheric moisture | 95 % non-condensing |
Subject to technical changes
PI: Product information
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com