Motive Water Set
For a perfect dosing result
Motive water sets are preassembled fittings in various configuration levels and used in combination with booster pumps to guarantee a constant supply pressure for chlorine gas ejectors. The pressure reducing valve is the most important part of the motive water unit. It compensates all pressure fluctuations in the booster pump.
Motive Water Set
- Pre-assembled fixture
- Constant supply pressure for ejectors
- Max. flow rate 24 m³/h
Further product views
| Nominal width | DN 15 | DN 32 | DN 50 | ||
|---|---|---|---|---|---|
| Max. flow rate | m3/h | 3 | 6 | 24 | |
| Pressure reducer setting range | bar | 1.5...6.0 | |||
| Max. supply pressure | bar | 16 | |||
| Pressure reducer equipment | Pressure gauge 0...10 bar, Ø63 mm Strainer |
||||
| Material for shutoff valve, pressure reducer, solenoid valve | Red brass | ||||
| Material for non-return valve | PVC / FPM / Hastelloy | ||||
| Max. operating pressure | °C | 40 | |||
| Solenoid valve | 230 V, 50/60 Hz | ||||
Subject to technical changes
PI: Product information
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com