Centrifugal pump TMR G3
Conveying chemicals safely
With non-contact magnetic power transmission, no dynamic shaft seals are necessary and thus a hermetically sealed pump housing is possible, which prevents leaks. Bearing materials made of ceramic and Rulon allow individual adaptation to difficult operating conditions, such as dry run, small amounts of solids or highly aggressive media.
Centrifugal pump TMR G3
- No dynamic shaft seals
- Pump hermetically sealed
- Version "R" suitable for dry running by means of a patented magnetic „two axial directions self-aligning system“
- Also suitable for liquids with high specific weight
- Variable connections possibilities
- Protection plate made of metal protects the pump housing against mechanical damage
Further product views
Type | WR | GF | GX | ||
---|---|---|---|---|---|
Material volute casing rear casing impeller | PP (GF-reinforced) | ECTFE (CF-reinforced) | |||
Material seal | Viton® 1) | Viton® 1) 2) | |||
Guide bearing "R" | HD-carbon | ||||
Guide bearing "X" | SiC | - | |||
Guide bearing "N" | Rulon® | - | |||
Material shaft | Ceramic | SiC | |||
Material thrust ring | Ceramic | SiC | |||
Operating temperature | °C | -5...+80 | -20...+100 |
20.15 | 20.20 | 20.27 | 20.36 | 30.15 | 30.25 | 36.30 | |||
Inlet | BSP | G 2 | |||||||
Outlet | BSP | G 1 1/2 | |||||||
Suction flange | DN50 | ||||||||
Pressure flange | DN40 | ||||||||
Max. delivery rate | m3/h | 31 | 36 | 35 | 43 | 48 | |||
Max. delivery head | mWC | 25 | 30 | 35 | 40 | 22 | 30 | 40 | |
Motor power motor type N | kW | 2.2 | 3.0 | 4.0 | 5.5 | 4.0 | 5.5 | 7.5 | |
Motor power motor type P | kW | 3.0 | 4.0 | 5.5 | 7.5 | 5.5 | 7.5 | - | |
Motor power motor type S | kW | 4.0 | 5.5 | 7.5 | - | 7.5 | - |
On request: 1) EPDM and 2) FFKM (Kalrez®)
Subject to technical changes
BA: Operation instruction
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com