Flow Meter FLOWCON
For a perfect dosing result
The flow sensor FLOWCON was developed particularly for the monitoring of pulsating flows. Due to its very compact design, it can be mounted directly to the discharge valve of a dosing pump. A reed contact gives a potential free impulse on each stroke of the dosing pump. In combination with the electronic evaluation unit FLOWCON an operator has an effective and exact monitoring system for the liquid behavior in discharge lines at hand.
Flow Meter FLOWCON
- Efficient monitoring of pulsating flows
- Compact design and high product stability
- Simple handling
- Chemical feed ranges between 0.05 and 50 l/h
Further product views
Housing material | PVC or PMMA | ||
---|---|---|---|
Sealing material | FPM or EPDM | ||
Connection Inlet | Inlet: Union nut G 5/8 or G 3/4 | ||
Connection Outlet | Output: male thread G 5/8 or G 3/4 | ||
Dosing range 1 | l/h | Solenoid-driven dosing pumps: 0.05...12 | |
Dosing range 2 | l/h | Motor-driven dosing pumps: 0.5...50 | |
Max. system pressure | bar | 10 | |
Max. viscosity at stroke frequency 100 min-1 | mPas | 20 | |
Max. viscosity at stroke frequency 150 min-1 | mPas | 10 | |
Max. medium temperature | °C | 35 | |
Electric rating reed contact | 48 V AC/DC, 0.5 A, max. 12 VA |
Subject to technical changes
BA: Operation instruction
PI: Product information
Lutz-Jesco Middle East FZE
Office P6-16, P.O. Box 9614
SAIF-Free Zone Center
Sharjah
Phone: +971 6 5572205
Fax: + 971 6 5572230
mailto:info(at)jescome.com